How To Take Your Measurements for
Aluminum and Clear Lexan Storm Panels
-
Start at your front door and go counter clockwise around the house identifying each opening. At each opening...
-
Measure the Width: At each opening, first measure the width. Just the opening, don't extend onto the actual wall.
Note: Our installed panels are designed to extend at least 4 inches on all sides beyond the actual opening. Please record if there are any obstructions (e.g. columns, building corner, architectural designs, etc) that would interfere with the required 4 inches. If you should have such an obstruction, in most cases we can still install the panels by making a modification.
-
Measure the Height: Like the width, just measure the opening's height without extending onto other surfaces.
Note: Please again record if there are any obstructions within 4 inches on either the top or bottom. In the case of a door, indicate the distance from the bottom edge to the outside lower surface. For example bottom of the door might be 6 inches up from the patio or it might be flush with the outside floor.
|
